The paint has been specially developed for painting bicycle frames (steel, aluminium, carbon). No priming or post-treatment is necessary. Only a single coat of paint is required and can be sprayed directly onto the surface. One 400ml can is sufficient for one frame and one fork.
It is a dry matt powder coating that does not drip or spill. Due to the high pigmentation the colours are very strong and cover very well. For a glossy or satin look you can use a transparent finish from us. In addition, the bicycle paint is weatherproof.
Instructions for use
Wear gloves, protective clothing and a mask when using.
Make sure the frame is clean and dry.
For a perfect hold, the surface can be roughened with fine sandpaper.
With brand-new frames painted with gloss varnish it is absolutely necessary to roughen the surface a little with sandpaper.
Use the spray only open-air.
Shake the spray can for about 3 minutes for the perfect result.
Make 2-3 test sprayers before starting.
Spray only with the spray can in the vertical position, otherwise the paint may be applied unequally.
When spraying, keep the can constantly moving.
If a second coating is to be applied, wait 2 hours.
If the spray can is to be reused, spray upside down for 2 seconds.
When storing the can, the temperature should not exceed 50 °C.
Spray distance:
Normal colours: 5-12 cm
Pocket Clears, Frame Builder/s Smoothing Putty, Frame Builder/s Transparent Finish, Frame Builder/s Cold-Zinc: minimum 20 cm
Keirin (Flake & Sunlight): minimum 30 cm
Technical data
Colour | Different |
---|---|
Content | 400 ml |
Look | Matt |
Application to | Steel Aluminium Carbon |
Distance during spraying | 5 - 12 cm |
Scope of delivery | Bicycle paint |


